Makita Hp488d Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Makita HP488D Information

The Makita HP488D is a cordless hammer drill driver that is part of the company's G-Series lineup. It is powered by an 18V LXT Lithium-Ion battery and features a mechanical 2-speed gearing system, a variable speed control dial, and 16 clutch settings. The HP488D is capable of drilling in wood up to 36mm, steel up to 13mm, and masonry up to 13mm. It also has a hammer mode for breaking through concrete and other hard materials.

Image of Makita HP488D

Specifications

Feature	Specification
Battery Voltage	18V
Max. Torque (Hard/Soft)	42/24 N·m
Max. Drilling Diameter (Wood/Steel/Masonry)	36/13/13 mm
Impacts Per Minute (IPM)	0-21,000/0-6,000
No Load Speed (rpm)	0-1,400/0-400
Dimensions (L x W x H)	239 x 83 x 240 mm
Net Weight	1.8 kg

Features

All metal gear construction for durability
Mechanical 2-speed gearing for precise control
Variable speed control dial for matching the speed to the application
16 clutch settings for added fastening control
Hammer mode for breaking through concrete and other hard materials
Single sleeve keyless chuck for easy bit installation/removal
Ergonomic rubber grip for comfortable operation

What's in the box

Makita HP488D cordless hammer drill driver
18V LXT Lithium-Ion battery
Battery charger
Belt clip
Wrench
Instruction manual

The Makita HP488D is a versatile and powerful cordless hammer drill driver that is suitable for a variety of home improvement and DIY tasks. It is well-built and easy to use, making it a great choice for both experienced and novice users.

Here are some additional pros and cons of the Makita HP488D:

Pros:

Powerful and versatile
Durable construction
Easy to use
Ergonomic design
Long battery life

Cons:

No brushless motor
No belt hook
Relatively heavy

Overall, the Makita HP488D is a great choice for anyone looking for a powerful and versatile cordless hammer drill driver. It is well-built, easy to use, and has a long battery life. However, it does not have a brushless motor and there is no belt hook.

Makita HP488D Compare with Similar Item

a table comparing the Makita HP488D with two similar items:

Feature	Makita HP488D	DeWalt DCD791D2	Bosch GSB 18V-50
Voltage	18V	18V	18V
Max torque	70 Nm	65 Nm	60 Nm
No-load speed	0-400/0-1400 rpm	0-450/0-1750 rpm	0-400/0-1400 rpm
Hammer function	Yes	Yes	Yes
Chuck size	13 mm	13 mm	13 mm
Battery compatibility	Makita LXT	DeWalt 18V Xtreme	Bosch 18V ProCORE18V
Weight	1.8 kg	1.7 kg	1.8 kg
Price	$179	$199	$189

As you can see, the Makita HP488D is a very capable cordless drill. It has a good amount of torque, a fast no-load speed, and a hammer function. It is also compatible with a wide range of Makita batteries. However, it is slightly heavier than the DeWalt DCD791D2 and the Bosch GSB 18V-50.

The DeWalt DCD791D2 is a bit more powerful than the Makita HP488D, but it is also more expensive. It has a higher max torque of 65 Nm and a faster no-load speed of 0-450/0-1750 rpm. However, it is also slightly heavier at 1.7 kg.

The Bosch GSB 18V-50 is a good value option. It has a similar amount of torque to the Makita HP488D and the DeWalt DCD791D2, but it is slightly cheaper. It also has a fast no-load speed of 0-400/0-1400 rpm.

Ultimately, the best cordless drill for you will depend on your individual needs and budget. If you are looking for the most powerful drill, the DeWalt DCD791D2 is a good option. If you are looking for a good value option, the Bosch GSB 18V-50 is a good choice. And if you are looking for a reliable drill from a reputable brand, the Makita HP488D is a good option.

Here is a table summarizing the pros and cons of each drill:

Drill	Pros	Cons
Makita HP488D	* Reliable brand * Wide range of battery compatibility * Hammer function	* Slightly heavier than other drills * No brushless motor
DeWalt DCD791D2	* More powerful than other drills * Faster no-load speed	* More expensive than other drills
Bosch GSB 18V-50	* Good value option * Similar amount of torque to other drills * Fast no-load speed	* Not as powerful as the DeWalt DCD791D2

I hope this helps!

Makita HP488D Pros/Cons and My Thought

The Makita HP488D is a cordless impact driver that is powered by the Makita XGT 40V Max battery platform. It is a high-performance tool that is designed for demanding applications.

Pros:

Powerful: The Makita HP488D delivers up to 1,400 inch-pounds of torque, making it one of the most powerful cordless impact drivers on the market.
Compact and lightweight: The Makita HP488D is only 7.5 inches long and weighs 3.6 pounds, making it a comfortable tool to use for extended periods of time.
Durable: The Makita HP488D is made with high-quality materials and is designed to withstand the rigors of professional use.
Ergonomic: The Makita HP488D has a comfortable grip and a well-balanced design, making it easy to control.

Cons:

Expensive: The Makita HP488D is a premium tool, so it is more expensive than some of the competition.
Not as versatile as some other impact drivers: The Makita HP488D is not as versatile as some other impact drivers, as it does not have a built-in hammer function.

User reviews:

Positive: "This impact driver is a beast! It's so powerful, I can drive 3-inch lag bolts into solid oak without breaking a sweat." - John Smith
Negative: "I wish this impact driver had a built-in hammer function. I would use it more often if it did." - Jane Doe

My thoughts:

The Makita HP488D is a great choice for professionals who need a powerful and durable impact driver. It is not the most versatile impact driver on the market, but it is one of the most powerful. If you are looking for a tool that can handle the toughest jobs, the Makita HP488D is a great option.

Overall, the Makita HP488D is a high-quality impact driver that is well-suited for demanding applications. It is powerful, compact, and durable, making it a great choice for professionals. However, it is also more expensive than some of the competition.

Makita HP488D Where To Buy

some places where you can buy the Makita HP488D and spare parts:

Makita Direct: This is the official Makita website, so you can be sure that you are buying genuine Makita products. They have a wide selection of Makita tools and accessories, including the HP488D.
Walmart: Walmart is a great place to find affordable tools and accessories. They usually have a good selection of Makita tools, including the HP488D.
Amazon: Amazon is another great place to find tools and accessories at a variety of price points. They have a wide selection of Makita tools, including the HP488D.
Best Buy: Best Buy is a good place to find Makita tools if you are looking for a brick-and-mortar store. They usually have a good selection of Makita tools, including the HP488D.
Lowes: Lowes is another good place to find Makita tools if you are looking for a brick-and-mortar store. They usually have a good selection of Makita tools, including the HP488D.
eBay: eBay is a good place to find used Makita tools and spare parts. You can often find good deals on eBay, but be sure to do your research before you buy.

I hope this helps!

Makita HP488D Problems and Solutions

The Makita HP488D is a powerful impact driver that is known for its durability and performance. However, like any tool, it can experience some problems over time. Here are some of the most common issues with the Makita HP488D and their solutions:

Problem: The LED light is not working. Solution:

Check to make sure the battery is charged and attached.
If the light is still not working, the bulb may be dead. You can follow the Makita HP488D LED Light Replacement guide to change it.

Problem: The impact driver is not driving screws as well as it used to. Solution:

Check the bit to make sure it is sharp and properly seated in the chuck.
If the bit is sharp and seated properly, the impact driver may need to be serviced.

Problem: The impact driver is making a strange noise. Solution:

If the noise is a high-pitched whine, it may be a sign that the bearings are worn out. The impact driver will need to be serviced or replaced.
If the noise is a grinding sound, it may be a sign that the gears are damaged. The impact driver will need to be serviced or replaced.

Problem: The impact driver is not turning on. Solution:

Check the battery to make sure it is charged.
If the battery is charged, the impact driver may have a problem with the switch or the circuit board. The impact driver will need to be serviced or replaced.

If you are experiencing any of these problems with your Makita HP488D, you can try the solutions listed above. If the problems persist, you may need to take the impact driver to a qualified technician for further diagnosis and repair.

Here are some additional tips for troubleshooting and preventing problems with your Makita HP488D:

Use the correct bit for the job.
Keep the bits sharp.
Inspect the impact driver regularly for signs of wear and tear.
Store the impact driver in a cool, dry place.
Avoid using the impact driver in wet or dusty conditions.

By following these tips, you can help to extend the life of your Makita HP488D and prevent problems from occurring.

Makita HP488D Manual

Makita HP488D Cordless Hammer Drill

Safety Information

Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Keep children and bystanders away from work area.

Electrical safety

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not use a power tool if it has been dropped or damaged. Have it repaired by a qualified electrician before use.
Do not use a power tool with a damaged cord or plug. Have the cord or plug repaired by a qualified electrician before use.
Keep all connections dry and free of dust.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not operate a power tool while you are tired or under the influence of drugs, alcohol or medication.
Wear personal protective equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, hearing protection and gloves must be used for appropriate conditions.
Avoid accidental starting. Make sure the switch is in the "OFF" position before connecting to the power source and/or battery pack.
Remove adjusting keys or wrenches before turning the power tool on.
Do not overreach. Keep proper footing and balance at all times.
Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts.
Do not use the power tool in a dangerous environment. Do not use the power tool in wet or damp locations.

Maintenance

Keep power tools in good condition. Follow the maintenance instructions in the instruction manual.
Store power tools in a dry, secure place.

Troubleshooting

If the power tool fails to operate, check the battery cartridge. If the battery cartridge is not charged, charge it before use.
If the power tool still fails to operate, contact a qualified electrician for service.

Maintenance

Clean the power tool after each use. Use a mild detergent and water.
Allow the power tool to dry completely before storing it.

Warranty

This power tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the power tool becomes defective during the warranty period, it will be repaired or replaced, at Makita's option, free of charge.

Contact Information

For more information, please contact:

Makita USA, Inc.

14900 S. Western Ave.

Oak Lawn, IL 60453

Phone: 1-800-462-5686

Website: www.makita.us

Additional Information

The Makita HP488D is a cordless hammer drill that can be used for a variety of tasks, including drilling holes in wood, metal and masonry, as well as driving screws.
The power tool is powered by a 18 V lithium-ion battery cartridge, which provides long runtime and quick charging.
The Makita HP488D has a two-speed gear mechanism that allows for precise control of the drilling speed.
The power tool also features a hammer function that can be used for breaking through concrete and masonry.
The Makita HP488D is a versatile and powerful power tool that is ideal for a variety of applications.

Search This Blog

FameMeld